7 Things to Be Aware of Before Buying a Furnace in Ocala
Purchasing a new furnace may not be a priority in the immediate future. But it’s wise to know the things that will likely influence your selection when you’re ready to buy. Here are seven things you’ll want to consider when it’s time for furnace replacement in Ocala.
1. Size and Installation Quality
To run at maximum efficiency and comfort, your furnace must be correctly sized for your home. When it comes to furnaces, bigger is definitely not better. We frequently get requests from customers to install a big furnace in the mistaken belief that a larger furnace is either more dependable or will offer better comfort.
The opposite is true. Large furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with higher energy bills and a furnace that could need replacing much sooner.
This is why it’s important to work with the right company when purchasing a new furnace. Even if it’s the right size but installed wrong, the U.S. Department of Energy says you could forfeit as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or improperly designed, you might have problems with noise or comfort. A furnace is only as good as the duct system it’s linked to.
At Service Experts Heating & Air Conditioning, our Expert HVAC technicians are ACE certified, which means they’re knowledgeable about repairing and installing various kinds of home comfort systems. In addition to technical skill, our technicians are also trained in treating you fairly. We also stand behind our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term known as AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The higher the number, the less gas is wasted during the heating process.
If your current furnace is 15 years old, it’s likely ranked well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re wasting up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work today:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—highest efficiency rating available.
3. Blower Motor Technology
As you evaluate new furnaces there is one more important thing to consider: blower technology. This part moves air throughout your home. And it also consumes a lot of electricity, so it’s essential to know about your options.
There are three types of blowers available on furnaces today. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a standard blower motor that’s been mostly unchanged for the past 30 years. This motor is the least costly and also the least energy efficient.
- Constant torque motor. This technology strikes a balance between price and energy efficiency. It delivers an electrical efficiency boost over a standard motor design.
- Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of operating at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs low, both in the winter and summer. And it also keeps indoor humidity under control.
4. Sound Reduction Technology
Sound has become a very important consideration with furnace installation, so another dramatic improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Whisper-quiet gas burners
With this technology, you might not even be aware that your furnace is on.
5. Smart Thermostat
You probably have a programmable thermostat, but it's quite possible you probably aren’t maximizing your energy savings. These thermostats can be complicated to program, particularly if your schedule changes from day to day.
A smart thermostat removes all the guessing about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as needed.
As an extra perk, you’ll also be able to monitor and change your settings from just about anyplace on your phone. Some models can even alert you if they detect a problem with your furnace or remind you when it’s time to change your air filter.
There’s a significant difference in furnace quality and reliability. Like any big purchase, we believe it’s best to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more assurance in the technology and that the manufacturer will uphold its product warranty over the long haul.
Furnaces usually have two main warranty coverage areas:
- Heat exchanger. This is the center of the furnace and the costliest component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
- Main parts. This involves the blower motor, electronic controls, ignitors and other key parts. Warranties can vary from as little as a one-year limited warranty to as much as a 10-year limited warranty.
When reviewing warranty coverage, it’s important to know it's limited. So, you should make sure you understand the restrictions. For instance, nearly all standard manufacturer warranties only cover the cost of the replacement part, not labor. And labor on a replacing heat exchanger could get costly.
Once your new furnace is installed, make sure you complete the product registration right away. Many manufacturers may limit the warranty term if the product registration is not done. This step is simple and typically only takes a few minutes.
How much does all this cost anyway? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency system.
As you consider these costs and the affect on your budget, remember that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of other ways to save include:
- Getting a new air conditioner simultaneously.
- Purchasing at the right time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this less busy season.
- Reap the benefits of rebates from the federal and state government, as well as from your local utility provider. We can help you navigate this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll get a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to look for in a new furnace, when should you replace your outdated one? Here are a few ideas from our Experts that will help you decide.
Heating systems usually last 15–20 years. How long yours will keep going depends on whether you’ve done furnace maintenance, where you live and your desired temperature. If you’re in a place with harsh winters, your furnace will operate more often, potentially making it wear out sooner. The same goes if you like to keep your home at a warmer temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces age, the potential for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be especially costly. Common and expensive repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are greater than the half the price of a new furnace, it’s generally best to replace it.
Furnaces older than 15 years can be extremely inefficient. You could be wasting as much as 30% of the money you spend to heat your home. High energy costs and the desire to decrease energy consumption are also strong reasons to think about replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to lower their utility bills.
Trust Your Furnace Replacement to the Experts
It can seem intimidating trying to investigate furnace features on your own. Or know exactly when you should replace your furnace. Our Service Experts Heating & Air Conditioning Experts are here to make the process much smoother. Call us at 352-414-4006 or schedule an appointment online to book your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.